Simply put, you can reduce the amount of paint being sprayed at a time and/or increase air pressure. If you are using a gravity or siphon feed spray gun, this can be done by using a smaller tip, turning in the fluid needle, and/or increasing air pressure.
How do I prevent orange peel on auto paint?
The first step in avoiding the orange peel effect is choosing the correct size nozzle on your paint gun. If the nozzle is the wrong size, it could dispense too much product, which could create an uneven finish once the paint dries. The second step is to be extremely careful while applying coats of paint.
What causes orange peel effect on car paint?
Orange peel is typically the result of improper painting technique, and is caused by the quick evaporation of thinner, incorrect spray gun setup (e.g., low air pressure or incorrect nozzle), spraying the paint at an angle other than perpendicular, or applying excessive paint.
How do you keep clear coat from orange peel?
How to Prevent Orange Peel Clearcoat?
- Practice Spraying. Practice makes perfect. …
- Use the spray can trigger grip provided in our kit to apply 2-3 coats! It’s not a gimmick! …
- Keep the can 6-8 inches away from the panel. Not too close, Not too far! …
- Consider wind or temperature.
How does a spray gun prevent orange peels?
Quick Tips to Avoid Orange Peel
- Strain the paint to remove air bubbles.
- Thin the paint to create a finer finish.
- Don’t shake your paint. …
- Don’t store or spray paint in high humidity/weather.
- Don’t output too much paint.
- Thoroughly clean your sprayer.
- Be sure your paint is completely dry before applying additional coats.
Can you clear coat over orange peel?
Similarly, can you clear coat over orange peel? Sorry, but clear coat is not a solution to orange peel. It takes too many coats, which obliterates the detail. Do the necessary wet sanding (unless you’re using a metal flake paint) with high grits before the clear.
Can you polish out orange peel?
When it comes to paint, one way or another there always is. Yes, orange peel is fixable. My challenge to you is to question at what cost. In my opinion it’s much easier and more effective to polish the area and smooth out as much as you can without being too abrasive, then follow with a nano coating.