Orange peel is typically the result of improper painting technique, and is caused by the quick evaporation of thinner, incorrect spray gun setup (e.g., low air pressure or incorrect nozzle), spraying the paint at an angle other than perpendicular, or applying excessive paint.
How do you stop orange peel when spray painting?
Quick Tips to Avoid Orange Peel
- Strain the paint to remove air bubbles.
- Thin the paint to create a finer finish.
- Don’t shake your paint. …
- Don’t store or spray paint in high humidity/weather.
- Don’t output too much paint.
- Thoroughly clean your sprayer.
- Be sure your paint is completely dry before applying additional coats.
Why does orange peel happen on paint?
Orange peel is the result of paint particles that are to large which causes an uneven, chunky finish. To fix orange peel you need to reduce the size of the paint particles that are sprayed (atomization!).
What causes orange peel with HVLP spray gun?
With the newer water-based materials orange peel is usually a result of spraying on too thick of a film. Try spraying an extremely THIN FILM, but still WET coat. A wet coat being “no dry spots that you think will flow together” and at the other end “no puddles or runs”. Remember don’t turn the air down too much.
How do you get rid of orange peel without sanding?
The best way to remove orange peel without sanding is to use fast cutting compound. Cutting compound is an abrasive paste that will erode an extremely thin layer of paint and wear away the orange peel in the process. Pick up some fast cutting compound at a local automotive or construction supply store.
What causes orange peel when spraying lacquer?
A pebbly surface on your project, with the texture of an orange peel, is the result of finish droplets that are too large or too thick to dry properly. Fixing orange peel is fairly easy. Wait until the coat is dry, sand it smooth, and spray the next coat with thinner material.
Is orange peel in paint or clear coat?
What is clear coat orange peel? Orange peel is essentially an imperfection in your custom car paint job. The clear coat is rough, and the paint looks uneven because the light reflects off it at different angles to the lack of a smooth finish.
Can I paint over orange peel?
Yodaforce said: Orange peel is as natural as it comes. Conditions have to be absolutely perfect for paint to go down everytime smooth as glass.
Can you polish orange peel out?
When it comes to paint, one way or another there always is. Yes, orange peel is fixable. My challenge to you is to question at what cost. In my opinion it’s much easier and more effective to polish the area and smooth out as much as you can without being too abrasive, then follow with a nano coating.
Why does polyurethane orange peel?
The most common cause of orange peel is an imbalance between the viscosity of the finish and the amount of air atomizing the liquid as it exits the gun. The thicker the liquid, the more air required; the thinner, the less air needed. So the obvious fix is to increase the air pressure or thin the material.